Polaris Scrambler Sportsman 400 2 Stroke Engine Kit

$ 220.00

Description

Click here to buy!

Every one of my rebuild kits are backed up with a one year GUARANTEE I also Guarantee no one provides the customer service I give when it comes to Polaris atv’s I am a one man show and answer my calls personally I provide help to anyone who calls. I am a Full time Self Employed Polaris ONLY ATV – UTV mechanic and one stop shop for Polaris 400 and 350 motors.I have EVERY part needed to rebuild your motor regardless of the problem…Cases , Counterbalance, Gears, Crank… WHATEVER !!!!!!!! If you’re getting water in the top end its not the head gasket it’s the water pump seals leaking.. Check your counterbalance oil if its tan or the dip stick is rusty the water pump seals are out! You need this kit. The dipstick under the carb and behind the pull starter on the backside of the motor,It’s a little orange or silver knob with a slot for a flat head screw driver. This kit is all the bearings, seals and gaskets (excluding rod bearing) to completely rebuild the lower end on any Polaris 400 AND 350 2 stroke motor. For the most part they are NTN brand bearings one of several brands Polaris uses I also use a sealed water pump bearing to have a back up seal on the water pump since its been such a problem and has served me well for over 8 years. The seals can be removed if you choose. Includes: All 4 bearings and 3 seals for the crank. 1 water pump bearing and 2 seals. Both front and rear counterbalance bearings. 1 Case and 1 water pump gaskets and 2 o rings. IF ALL YOU NEED IS THIS KIT AND NO OTHER PARTS I WILL REBUILD YOURS FOR $400.00 INCLUDING REBUILD KIT, LABOR AND SHIPPING IT BACK. SO FOR ANOTHER $175.00 YOU DON’T HAVE TO TOUCH IT!! I’ll GLASS BEAD / SAND BLAST the cases ,cylinder and any other motor part needed FREE !! I will rebuild the top end with a New Wiseco piston, Clean up bore,gaskets and labor $$250.00. THAT’S A TOTAL MOTOR REBUILD TOP/BOTTOM (New Bearings,Seals,Gaskets,Wiseco piston,Bore) $650.00 SHIPPED and that’s a third of what a shop will charge. I will turn a lowerend around in 3 to 5 days and a complete motor in 7 to 10 days. Shipping on a whole motor 65 lbs has cost me around 25.00 to 40.00 bucks to ship……………………………….. If Your cases are busted I have used ones.. If your counterbalance is bad I have a good used one.. I will even give a 6 month GUARANTEE on all LOWER-END’S I REBUILD!! BE SURE TO ASK WHAT KIND OF WARRANTY YOU GET IF YOU FIND A GOOD USED ONE OR DEALER REBUILD. ILL SAVE YOU SOME TIME AND CASH!!! You will pay over 250.00 for these parts at the dealer and have to wait 2 weeks to get them. MY# IS 972 896 1002 / 1800 941 1002 AND IM UP LATE SO CALL ANYTIME AND LEAVE A NUMBER IF I MISS YOU….. I WILL CALL YOU BACK. Todd Kerby……… POLARISREPAIR.COM HOME 2618 Larkspur ln. Rowlett, Texas 75089THANKS FOR YOUR SUPPORT I NEED IT!

Be Sociable, Share!